CSM 800 sqft Sound Masking System
Prepackaged sound masking system designed for 800 sqft spaces
- Qt 100 Sound Masking Control Module
- 2 sets of 4 Sound Masking Emitters
- Initial-run 50ft Plenum-rated Cat5 Cable
- Mounts, hardware, and hole saw used for installation
CSM Qt 100 Sound Masking System
The Qt 100 is ideal for single zone spaces of up to 12,000 square feet (1,115 m2). The Qt 100 is easily controlled from the module’s front panel or Bluetooth connected iOS device, making volume adjustments quick and easy.
The Qt 100 comes standard with a wall mount. The wall mount provides level mounting for quick and easy installation.
Qt emitters are installed along a simple grid pattern based on ceiling height. Qt emitters can be installed into standard ceiling tiles ranging from 0.5" to 1.5" (1.3 cm - 3.8 cm) thick. Qt emitters can also be installed into any ceiling type using a variety of mounting options. Emitters are plug-and-play, daisy-chained together with CAT-3 and higher, plenum-rated cables. We supply with every emitter, pre-terminated CAT3 cables with industry standard RJ-45 connectors.
The Qt 100 can make a big impact in small spaces needing improved speech privacy including:
- Bank teller windows
- Corporate offices
- Counseling offices
- Dental practices
- Houses of worship
- Outpatient clinics
- Pharmacy counter
- Waiting rooms
CSM 4 Pack of Sound Masking Emitters
Qt emitters are the backbone of the Qt Quiet Technology Sound Masking System. Qt emitters are wide dispersion direct field speakers with 1.25” (3.17 cm) drivers and are smaller than a coffee mug. All Qt emitters come in the adjustable format. These emitters deliver four uncorrelated audio channels, which provide uniform, unobtrusive sound masking. This feature, along with plug and play installation and easy configuration capability, make Qt™ systems the most intelligently engineered and most effective sound masking systems on the market today.
Qt™ Adjustable Emitters offer users greater flexibility in laying out their Qt system. Adjustable emitters allow users to reduce the volume level of an individual emitter by up to 9 dB in 3 dB decrements. The adjustable emitter is appropriate for individual spot adjustments, or creating micro zones down to 100 square feet (9.3 m2) of space.
Qt emitters are installed along a simple grid pattern based on ceiling height. For a standard 9’ (2.75 m) ceiling, emitters are laid out on a 10’ x 10’ (3 m x 3m) grid. Emitters can be installed into standard ceiling tiles ranging from 0.5” to 1.5” (1.3 cm – 3.8 cm) thick. Emitters are plug-and-play, daisy-chained together with CAT-3, plenum-rated cables. We supply with every emitter, pre-terminated CAT3 cables with industry standard RJ-45 connectors.